Description:

Newest joyetech cuboid lite 80w vape kit, include cuboid lite mod and exceed D22 tank. made of high-quality zinc alloy and stainless steel material, five fashionable colors available. the cuboid lite with compact and portable size, built-in 3000mah battery, max output 80watts, with quick charge system, can be get fully charged more quickly. the temperature protects function for safe charging, it will stop charging automatically when the temperature is beyond the applicable scope to protect the battery. different output working modes switchable supports resistance as low as 0.05ohm under temp control and TCR working modes. the cuboid lite TC box mod with large 1.45inch TFT color screen with easy to go operation system, this joyetech advanced box mod is intuitively designed with the purpose for an ultimate vaping experience. the exquisite spring loaded 510 connector of the cuboid lite is applicable for tanks with 510 lengths ranged at 4.0mm to 5.5mm, tanks are also free to go up to 25mm diameter. the joyetech temp control box  mod applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, makes vape more safe and reliable.the exceed D22 sub ohm tank's diameter is 22mm, can hold 2ml e juice, if install the extra 3.5ml glass tube, can hold more e juice. the refined airflow control system with three small holes for mouth-to-lung inhale and one wide slot for direct-lung inhale. the convenient top refill design allow you inject the e juice quickly. the packing comes with two sub ohm cores,0.5ohm EX DL core and 1.2ohm EX MTL core. can fire up to 35watts, will bring you a large cloud of vapor and flavor.

Features Of Cuboid Lite Mod:

• Material: Zinc alloy
• Size: 114*41*26mm
• Colors:  Silver, Black, Red, Yellow, Purple
• Compact and portable
• Battery: built-in 3000mAh
• Screen: 1.45inch TFT screen
• Output wattage: 1-80W
• Output working modes: power/bypass/TC-TI, TC-NI, TC-SS, TCR(M1, M2, M3)
• Resistance range: 0.05-1.5ohm(TC/TCR)/0.1-3.5ohm(VW/Bypass)
• Temp control range: 100-315C/200-600F
• The depth of 510 pins applicable: 4.0-5.5mm
• Max charging current: 2A
• Max output current: 30A
• Max output voltage: 9V
• Quick charge system
• Dual circuit protection
• Firmware upgradeable

Features Of Exceed D22 Tank:

• Material: Stainless steel + pyrex glass
• Colors: Silver, Black, Red, Yellow, Purple
• Size: 41.6*22mm
• Bottom airflow adjustable
• Top refill design
• Comes with an extra 3.5ml glass tank
• All parts detachable
• Coils: EX 0.5ohm DL coil, 20-35W, best 28W
•         EX 1.2ohm MTL coil, 8-14W, best 12W

Package:

1*cuboid lite mod

1*exceed D22 tank

1*EX 0.5ohm DL coil

1*EX 1.2ohm MTL coil

1*extended vent pipe

1*3.5ml extra glass tube

1*QC USB cable

1*Warranty card

1*Warning card

1*spare parts

2*user manuals

Note: please ensure you have basic knowledge on how to properly to use it.

1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only work with the mod that can support the atomizer and coil.if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm.improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have question,please feel free to contact us.

2)if the coils are sub ohm coils, the user should be sure that the tank and mods can handle the sub ohm resistance coils, please make sure you have the great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.

3)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.

4) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.